KNC1 TV-Station DVB-T: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
m (fixed link)
m (Added card details and link)
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
A [[DVB-T]] [[PCI]] card produced by [[KNC1]] based on the [[Philips SAA7146]].
A [[DVB-T]] [[PCI]] card produced by [[KNC1]] based on the [[Philips SAA7146]].
==Overview/Features==
*Interface: PCI
*Inputs: Antenna, CineView Module Connector
*Output: Antenna loop-through (amplified).
⚫
The card has a passthrough output, so you can daisy-chain multiple cards to one antenna (if your signal isn't too weak). The card also has a CI connector, which is supported under Linux.
===Components Used===
* [[Philips SAA7146]]
* tin box: Philips TU1216L
*demodulator location: tin box
** demodulator: Philips TDA10046 @0x08
* PLL: Philips tda6651tt @0x60
===Identification===
PCI device id: 1131:7146
PCI subsystem id: 1894:0030


==Making it Work==
Works fine under Linux.
Works fine under Linux.
===Firmware===

*Requires firmware for the TDA10046.
⚫
This card is able to deliver the full [[MPEG2 Transport Stream]] to the host.
===Drivers===

*frontend driver: tda1004x
== Details ==
⚫
*The card uses the '''budget-av''' driver in Linux

⚫
*This card is able to deliver the full [[MPEG-2 Transport Stream]] to the host.
⚫
The card has a passthrough output, so you can daisy-chain multiple cards to one antenna (if your signal isn't too weak).
*Card driver: budget-av

==External Links==
The card also has a CI connector, which is supported under Linux.
[http://www.knc1.com/gb/produkte/digital_dvb_t.htm TV-Station DVB-T product page.

[[Category:DVB-T PCI Cards]]
⚫
The card uses the '''budget-av''' driver in Linux, and requires Firmware for the TDA10046.

Latest revision as of 00:20, 12 May 2009

A DVB-T PCI card produced by KNC1 based on the Philips SAA7146.

Overview/Features

  • Interface: PCI
  • Inputs: Antenna, CineView Module Connector
  • Output: Antenna loop-through (amplified).

The card has a passthrough output, so you can daisy-chain multiple cards to one antenna (if your signal isn't too weak). The card also has a CI connector, which is supported under Linux.

Components Used

  • Philips SAA7146
  • tin box: Philips TU1216L
  • demodulator location: tin box
    • demodulator: Philips TDA10046 @0x08
  • PLL: Philips tda6651tt @0x60

Identification

 PCI device id: 1131:7146
 PCI subsystem id: 1894:0030

Making it Work

Works fine under Linux.

Firmware

  • Requires firmware for the TDA10046.

Drivers

  • frontend driver: tda1004x
  • The card uses the budget-av driver in Linux
  • This card is able to deliver the full MPEG-2 Transport Stream to the host.
  • Card driver: budget-av

External Links

[http://www.knc1.com/gb/produkte/digital_dvb_t.htm TV-Station DVB-T product page.

Retrieved from "https://www.linuxtv.org/wiki/index.php?title=KNC1_TV-Station_DVB-T&oldid=22681"