VDR developer version 1.7.6 is now available at
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.7.6.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.7.5-1.7.6.diff
WARNING: ========
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
IMPORTANT: ==========
If you use a full featured DVB card for replay you need the DVB driver version from
http://linuxtv.org/hg/~endriss/v4l-dvb
in order to replay TS recordings! Users of full featured DVB cards also need to use a new firmware, available at
http://www.escape-edv.de/endriss/firmware
Note that the header files in the latest driver versions may be broken. If you get compiler error messages like
/usr/include/sys/types.h:52: error: conflicting declaration 'typedef __ino64_t ino_t' /usr/include/linux/types.h:14: error: 'ino_t' has a previous declaration as 'typedef __kernel_ino_t ino_t'
when compiling VDR, you need to put the driver header files back to how they were before they got broken. One way of doing this is to apply the patch from
ftp://ftp.cadsoft.de/vdr/Developer/v4l-dvb-header-fix.diff
(I'm not claiming that this is the right way to fix this, since the driver developers may have had good reasons for making that change. However, both the driver and VDR compile and work fine with this).
The changes since version 1.7.5:
- cDevice::PlayTs() now syncs on the TS packet sync bytes. - Made MAXFRAMESIZE a multiple of TS_SIZE to avoid breaking up TS packets. - No longer resetting the patPmtParser in cDevice::PlayTs(), because this caused the selected audio and subtitle tracks to fall back to the default. - The SVDRP command PUTE now supports reading the EPG data from a given file (thanks to Helmut Auer). - Added cThread::SetIOPriority() and using it in cRemoveDeletedRecordingsThread (thanks to Rolf Ahrenberg). - Fixed the MEGABYTE() macro to make it correctly handle parameters resulting in values larger than 2GB. - Added cDevice::NumProvidedSystems() to PLUGINS.html (was missing since it had been implemented). - Fixed distortions when switching to the next file during replay. - Fixed detecting the frame rate for streams with PTS distances of 1800, which apparently split one frame over two payload units. - Added missing 'const' to cRecording::FramesPerSecond() (thanks to Joachim Wilke). - Any TS packets in the first "frame" after a cut in an edited recording that don't belong to a payload unit that started in that frame now get their TEI flag set, so that a decoder will ignore them together with any PES data collected for that PID so far (thanks to Oliver Endriss for reporting chirping sound disturbences at editing points in TS recordings). - cDvbPlayer::Empty() subtracts 1 from readIndex, because Action() will first increment it. - Only storing non-zero Pts values in ptsIndex. - Added a note to the INSTALL file about using subdirectories to split a large disk into separate areas for VDR's video data and other stuff (suggested by Udo Richter).
Have fun!
Klaus
Hi Klaus,
I have a recording problem with hd1 and hd3, both channels are at 7 east. It shows the recording started but not records it . also the ts file name is 0 kb. is there a vdr problem or copy protected channell?
Date: Sun, 26 Apr 2009 12:19:07 +0200 From: Klaus.Schmidinger@cadsoft.de To: vdr@linuxtv.org Subject: [vdr] [ANNOUNCE] VDR developer version 1.7.6
VDR developer version 1.7.6 is now available at
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.7.6.tar.bz2A 'diff' against the previous version is available at
ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.7.5-1.7.6.diffWARNING:
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
IMPORTANT:
If you use a full featured DVB card for replay you need the DVB driver version from
http://linuxtv.org/hg/~endriss/v4l-dvb
in order to replay TS recordings! Users of full featured DVB cards also need to use a new firmware, available at
http://www.escape-edv.de/endriss/firmware
Note that the header files in the latest driver versions may be broken. If you get compiler error messages like
/usr/include/sys/types.h:52: error: conflicting declaration 'typedef __ino64_t ino_t' /usr/include/linux/types.h:14: error: 'ino_t' has a previous declaration as 'typedef __kernel_ino_t ino_t'
when compiling VDR, you need to put the driver header files back to how they were before they got broken. One way of doing this is to apply the patch from
ftp://ftp.cadsoft.de/vdr/Developer/v4l-dvb-header-fix.diff
(I'm not claiming that this is the right way to fix this, since the driver developers may have had good reasons for making that change. However, both the driver and VDR compile and work fine with this).
The changes since version 1.7.5:
- cDevice::PlayTs() now syncs on the TS packet sync bytes.
- Made MAXFRAMESIZE a multiple of TS_SIZE to avoid breaking up TS packets.
- No longer resetting the patPmtParser in cDevice::PlayTs(), because this caused the selected audio and subtitle tracks to fall back to the default.
- The SVDRP command PUTE now supports reading the EPG data from a given file (thanks to Helmut Auer).
- Added cThread::SetIOPriority() and using it in cRemoveDeletedRecordingsThread (thanks to Rolf Ahrenberg).
- Fixed the MEGABYTE() macro to make it correctly handle parameters resulting in values larger than 2GB.
- Added cDevice::NumProvidedSystems() to PLUGINS.html (was missing since it had been implemented).
- Fixed distortions when switching to the next file during replay.
- Fixed detecting the frame rate for streams with PTS distances of 1800, which apparently split one frame over two payload units.
- Added missing 'const' to cRecording::FramesPerSecond() (thanks to Joachim Wilke).
- Any TS packets in the first "frame" after a cut in an edited recording that don't belong to a payload unit that started in that frame now get their TEI flag set, so that a decoder will ignore them together with any PES data collected for that PID so far (thanks to Oliver Endriss for reporting chirping sound disturbences at editing points in TS recordings).
- cDvbPlayer::Empty() subtracts 1 from readIndex, because Action() will first increment it.
- Only storing non-zero Pts values in ptsIndex.
- Added a note to the INSTALL file about using subdirectories to split a large disk into separate areas for VDR's video data and other stuff (suggested by Udo Richter).
Have fun!
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_________________________________________________________________ Windows Live™ Photos ile fotoğraflarınızı kolayca paylaşımı. http://www.microsoft.com/windows/windowslive/products/photos.aspx
On 04/26/09 13:45, H. Onur wrote:
I have a recording problem with hd1 and hd3, both channels are at 7 east. It shows the recording started but not records it . also the ts file name is 0 kb. is there a vdr problem or copy protected channell?
Without further details it's hard to say.
From http://de.kingofsat.net/sat-w3a.php it would appear like these
channels are encrypted. Please post your channels.conf lines for these channels, and the relevant syslog messages.
BTW: you should start a new thread with such a message, and not reply to the release note (let alone fully quote the entire thing) ;-)
Klaus
-
H. Onur -
Klaus Schmidinger