I built a VDR box a year ago; it worked;
For some reasons, I changed the motherboard and software.
Now dvbscan fails : I suspect the fact that the LNB is not powered.
My configuration
Fedora 8 x64_86 up to date Hauppauge Nexus dvb-s rev 2.3
There is signal, since the decoder works ok.
dvbscan fails, kaffeine too.
Thank you for your help
A bit more analysis :
There is signal detected by kaffeine ;
scandvb tunes to each transponder
But no service detected !!
I don't understand anything.
Firmare is ttpci-01.fw-22621f.
Thank you for your help
Pierre JUHEN a e'crit :
I built a VDR box a year ago; it worked;
For some reasons, I changed the motherboard and software.
Now dvbscan fails : I suspect the fact that the LNB is not powered.
My configuration
Fedora 8 x64_86 up to date Hauppauge Nexus dvb-s rev 2.3
There is signal, since the decoder works ok.
dvbscan fails, kaffeine too.
Thank you for your help
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
The problem seems to be solved by putting "nosmb" in the kernel parameters.
Strange, I thought this problem had been fixed sometime ago.
Pierre JUHEN a écrit :
I built a VDR box a year ago; it worked;
For some reasons, I changed the motherboard and software.
Now dvbscan fails : I suspect the fact that the LNB is not powered.
My configuration
Fedora 8 x64_86 up to date Hauppauge Nexus dvb-s rev 2.3
There is signal, since the decoder works ok.
dvbscan fails, kaffeine too.
Thank you for your help
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
The problem is not linked with smp.
I have a Aston 2.1x CAM module. When I take it off, everything works well.
So, it seems to be linked with the firmware.
My card is a 2.2 Nexus, with 2622 firmware.
Any help would be appreciated.
Regards,
Pierre
-
Pierre JUHEN