Hi,
When I switch from any channel to channel 1 ( ARD / Das Erste ). it happens sometimes that the vdr-??fe freezes. I have tried vdr-fbfe and vdr-sxfe, and xineliboutput 1.00rc2 and also the cvs version. The error was not always the same: with vdr-fbfe I have to kill and restart it, with vdr-sxfe the screen blanks on channel 1 and I can zap to other channels which were fine, but back to 1 gets a blank screen. After restarting vdr-sxfe everything's fine again. Any hints what's causing this problem ?
On Sunday, 28. Octoberta 2007 22:19:50 Helmut Auer wrote:
Hi,
When I switch from any channel to channel 1 ( ARD / Das Erste ). it happens sometimes that the vdr-??fe freezes. I have tried vdr-fbfe and vdr-sxfe, and xineliboutput 1.00rc2 and also the cvs version. The error was not always the same: with vdr-fbfe I have to kill and restart it, with vdr-sxfe the screen blanks on channel 1 and I can zap to other channels which were fine, but back to 1 gets a blank screen. After restarting vdr-sxfe everything's fine again. Any hints what's causing this problem ?
I have same problem.. Actually it's happening when I change channels too fast.. At syslog I get following (hundrets of lines, here just last of them)
Oct 28 12:07:27 htpc vdr: [6036] [xine..put] cXinelibServer::Play_PES Buffer overflow (TCP/PIPE) Oct 28 12:07:27 htpc vdr: [6036] [xine..put] cXinelibServer::Play_PES Buffer overflow (TCP/PIPE) Oct 28 12:07:27 htpc vdr: [6036] [xine..put] cXinelibServer: Too many TCP buffer overflows, dropping client Oct 28 12:07:27 htpc vdr: [6036] [xine..put] cXinelibServer::Play_PES Write/Queue error (TCP/PIPE) Oct 28 12:07:27 htpc vdr: [6036] [xine..put] Closing connection 0 Oct 28 12:07:27 htpc vdr-sxfe[10687]: [20891] [input_vdr] Control stream disconnected Oct 28 12:07:27 htpc vdr-sxfe[10687]: [20894] [input_vdr] read_block: no data source, returning NULL Oct 28 12:07:34 htpc vdr-sxfe[10687]: [10697] [input_vdr] write_control aborted
Hi,
This problem is still unsolved. When it happens the log shows:
Dec 2 16:29:53 [vdr] [3188] switching to channel 2 Dec 2 16:29:53 [logger] [4574] [input_vdr] UDP:65-65 missing, requested re-send for -1 frames Dec 2 16:29:53 [logger] [4574] [input_vdr] UDP:Got UDP MISSING 65-66 (currseq=65) Dec 2 16:29:53 [logger] [4574] [input_vdr] UDP: accepted: now currseq 66 Dec 2 16:29:53 [logger] [4574] [input_vdr] UDP:Got duplicate or window exceeded ? (queue slot 66 in use) ! Dec 2 16:29:53 [logger] CHAN 2 - Last output repeated twice - Dec 2 16:29:54 [logger] AFD changed from -2 to -1 Dec 2 16:29:54 [logger] [4574] [input_vdr] UDP:packet loss 0.2% ( 2/1000) Dec 2 16:29:56 [vdr] [3188] switching to channel 1 Dec 2 16:29:56 [logger] [4574] [input_vdr] UDP:111-111 missing, requested re-send for -1 frames Dec 2 16:29:56 [logger] [4574] [input_vdr] UDP:Got UDP MISSING 111-112 (currseq=111) Dec 2 16:29:56 [logger] [4574] [input_vdr] UDP: accepted: now currseq 112 Dec 2 16:29:56 [logger] [4574] [input_vdr] UDP:Got duplicate or window exceeded ? (queue slot 112 in use) ! Dec 2 16:29:57 [logger] CHAN 1
after that I do not see video on channel 1 and two but on other ones. After restarting vdr-??fe everything is fine.
-
Helmut Auer -
JJussi