Lauri Tischler wrote:
Harri Helmroos wrote:
Hello me, nice talking to myself...
Okay, I might have rushed a bit here.
Appears that this is _not_ a hardware problem. I found from somewhere a diseqc.conf where is A and B (for a mini diseqc or alike) commands applied.
Guess what happens when I put the commands in my diseqc.conf? ZZZZAP! Channels work precisely like they did before when I had single LNB's, meaning it works as it should.
But (there's always a but??), if I put for the third satellite command C, vdr won't start, instead it blames me for making an error in diseqc.conf. So I take that there doesn't even exist such a thing as C. My question is now, how do I get 3rd satellite (13.0E in position 3) to work with the 4/1 diseqc (I think it's a 1.0 protocol or whatever it's called).
Here's how it looks now, working so far with 2 first satellites:
[diseqc.conf start] S1.0W 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t S1.0W 99999 V 10600 t v W15 [E0 10 38 F0] W15 A W15 T S1.0W 11700 H 9750 t V W15 [E0 10 38 F0] W15 A W15 t S1.0W 99999 H 10600 t V W15 [E0 10 38 F0] W15 A W15 T
S5.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 B W15 t S5.0E 99999 V 10600 t v W15 [E0 10 38 F4] W15 B W15 T S5.0E 11700 H 9750 t V W15 [E0 10 38 F4] W15 B W15 t S5.0E 99999 H 10600 t V W15 [E0 10 38 F4] W15 B W15 T
#S13.0E 11700 V 9750 t v W15 [E0 10 38 F8] W15 t #S13.0E 99999 V 10600 t v W15 [E0 10 38 F8] W15 T #S13.0E 11700 H 9750 t V W15 [E0 10 38 F8] W15 t #S13.0E 99999 H 10600 t V W15 [E0 10 38 F8] W15 T [diseqc.conf ends]
Forget the A and B, they are for 2-port mini-switches That should do it.
# Port 1 S1.0W 11700 V 9750 t v W15 [E0 10 38 F0] W15 t S1.0W 99999 V 10600 t v W15 [E0 10 38 F0] W15 T S1.0W 11700 H 9750 t V W15 [E0 10 38 F0] W15 t S1.0W 99999 H 10600 t V W15 [E0 10 38 F0] W15 T # Port 2 S5.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 t S5.0E 99999 V 10600 t v W15 [E0 10 38 F4] W15 T S5.0E 11700 H 9750 t V W15 [E0 10 38 F4] W15 t S5.0E 99999 H 10600 t V W15 [E0 10 38 F4] W15 T # Port 3 S13.0E 11700 V 9750 t v W15 [E0 10 38 F8] W15 t S13.0E 99999 V 10600 t v W15 [E0 10 38 F8] W15 T S13.0E 11700 H 9750 t V W15 [E0 10 38 F8] W15 t S13.0E 99999 H 10600 t V W15 [E0 10 38 F8] W15 T # Port 4 S19.2E 11700 V 9750 t v W15 [E0 10 38 FC] W15 t S19.2E 99999 V 10600 t v W15 [E0 10 38 FC] W15 T S19.2E 11700 H 9750 t V W15 [E0 10 38 FC] W15 t S19.2E 99999 H 10600 t V W15 [E0 10 38 FC] W15 T
Thanks Lauri for your reply. Unfortunately that configuration doesn't work with my twin-lnb's. I had that configuration from the beginning (since vdr-1.3.24) working with my single-lnb's.
After installing the twin-lnb's, that configuration just makes me have to switch to a channel with h-pol before I like to watch a chan with v-pol. Irritating problem I might say.
Greets, HH