[linux-dvb] Re: 2.6.10-rc3-bk3 doesn't properly detect skystar2'sfrontend

["Prakash K. Cheemplavam" <prakashkc@gmx.de>]

Niklas Peinecke schrieb:
> Prakash K. Cheemplavam wrote:
>
> > Niklas Peinecke schrieb:
> >
> > > Prakash K. Cheemplavam wrote:
> > >
> > > > Hi,
> > > >
> > > > dmesg shows:
> > > >
> > > >
> > > > drivers/media/dvb/b2c2/skystar2.c: FlexCopII(rev.130) chip found
> > > > drivers/media/dvb/b2c2/skystar2.c: the chip has 6 hardware filters
> > > > DVB: registering new adapter (SkyStar2).
> > > > master_xfer: write error 0 !
> > > > message 0: flags=0x0, addr=0x68, buf[0]=0x2, len=2
> > > > master_xfer: read error !
> > > > message 0: flags=0x0, addr=0x68, buf=0x0, len=1
> > > > message 1: flags=0x1, addr=0x68, buf=0x0, len=1
> > > > master_xfer: read error !
> > > > message 0: flags=0x0, addr=0xf, buf=0x7f, len=1
> > > > message 1: flags=0x1, addr=0xf, buf=0x0, len=1
> > > > mt352_read_register: readreg error (ret == -121)
> > > > skystar2: A frontend driver was not found for device 13d0/2103 
> > > > subsystem 13d0/2103
> > > Maybe you need the stv0299 frontend?
> >
> >
> > Nope, I don't think so... ;-) I have rev ss2 2.3.
> >
> > > > I have compiled in dvbcore, skystar2 and mt312 and this worked with 
> > > > 2.6.10-rc3 kernel.
> > >
> > >
> > >
> > > What does that mean? It used to work before or just compilation worked?
> >
> >
> > Yes, it compiled and the device worked.
> >
> > Prakash
> If it works you don't have to worry about error messages: They just tell 
> that there is no mt352 frontend attached (which is no surprise since 
> mt352 is the frontend for the Airstar).
> Are there any problems apart from the messages?
Yes, there seems to be confusion. :-)

2.6.10-rc3: The device works as expected (though I get three lines of 
uncritical errors.)

2.6.10-rc3-bk3: I get above errors and the device does *not* work.

Cheers,

Prakash

Attachment: signature.asc
Description: OpenPGP digital signature